Jjc RM-E9 Manual de usuario descargar pdf (Pagina 1)

JJC RM-E9

Long Range Infrared Remote Control Instruction

Thank you for purchasing JJC RME9 long range Infrared Remote Control. For the best

performance, please read this instruction carefully before use

z To use RM-E9 Remote Control

1. For the first time use, please pull out the plastic separator (if your remote control has

it) at the battery holder.

2. Mount the camera on a tripod (recommended) or place the camera on a stable, level

surface.

3. Press the button and rotate main command dial until (delayed remote) or (quick

response remote) is displayed in the control panel.

4. Aim the transmitter on the remote control at the infrared receiver on the camera

(usually within +/- 20 degree of the lens axis, from the left to the right and from the top

to the bottom) and press the shutter-release button on the remote control (when using

the remote outdoors, make sure that the subject is not backlit and that the line of site

between the transmitter and the infrared receiver is not blocked by the lens or other

obstacles).

5. How the camera focuses and shoots depends on the option selected for your

camera's custom setting. For further information, check your camera's manual.

6. Infrared cannot be seen by human eyes. So you will see no visible light from the LED

on the front end of the remote control when operating.

For further information, check your camera's manual.

1 2 3

1JJC RM-E9 Long Range Infrared Remote Control Instruction Thank you for purchasing JJC RME9 long range Infrared Remote Control. For the best perform

2z Identifying the buttons z Specification • Easy-to-replace CR2025 lithium battery. • Operating temperature: 5 °C to 40 °C (40 °F to 105 °F).

3z Attention a. When the remote control is not in use over a long time, please remove the battery from the remote control. b. Do not leave the rem

Sin comentarios

Jjc RM-E9 Manual de usuario Pagina 1